Aeroprobe offers a variety of probes in different shapes, sizes, and geometries.
- 3 or 5 hole
- Real time measurement
- Angle of Attack
- Angle of Sideslip
- Indicated & True Air speed
- Total & Static Pressure
- Barometric Altitude
- Unmanned Aerial Vehicles (UAV)
- Motor Sports
- Wind Tunnel Characterization
- Wind Turbine
- Tip as small as 3.2mm
- Flow angles up to 60°
- Tip as small as 1.6 mm
- Temperature rating up to 500° C
- High accuracy calibrations
- Wind Tunnel
- Turbomachinery
- Air Handling Systems
- Custom engineered probes to meet your needs
- Customization can include tip sizes, geometry, mount, or materials
- Customized options for almost any industry
- Flow angles up to 60°
- Tip as small as 1.6 mm
- Temperature rating up to 900° C
- High accuracy calibrations
- Calibration up to M = 1.8
- Aviation
- Air Handling
- Gas Turbines
- Steam Turbines
- Turbomachinery
- Flow angles up to 60°
- Tip as small as 1.6 mm
- Temperature rating up to 900° C
- High accuracy calibrations
- Aviation
- Air Handling
- Gas Turbines
- Steam Turbines
- Turbomachinery
- Frequency response up to 4,500 Hz
- Flow angles up to 60°
- Tip as small as 3.2 mm
- Temperature rating up to 75° C
- High accuracy calibration
- Unsteady measurements
- Turbomachinery
- Automotive wind tunnel – wake detection
- Wind engineering
- Robust option for large dynamic fluctuations
- 3 or 5 hole
- Real time measurement
- Angle of Attack
- Angle of Sideslip
- Indicated & True Air speed
- Total & Static Pressure
- Barometric Altitude
- Unmanned Aerial Vehicles (UAV)
- Wind Tunnel Characterization
- Wind Turbine
- Tip size 9.5mm
- Calibration up to M = 0.7
- Temperature ratings up to 900°C
- Flow angles within ± 60°
- Tip as small as 1.6 mm
- High accuracy calibrations
- Gas turbines
- Gas afterburners
- Gas, steam, and exhaust testing
- Tip diameter from 3.2mm
- Temperature ratings up to 900° C
- Stainless steel or nickel based super alloy
- Standard media: non-reactive gases, air, water, and other fluids
- Aerospace
- Automotive
- Turbomachinery
- Flow angles up to 60°
- Tip as small as 1.6 mm
- Temperature rating up to 900° C
- High accuracy calibrations
- Perpendicular mount is less disruptive to air flow
- Wind tunnel testing
- Motorsports
- Automotive
- University/Research
- 12 hole
- Spherical tip
- Standard tip diameter starting at 6.35 mm
- Flow angles up to ± 150°
- Temperature rating up to 500° C
- High accuracy calibrations
- High angle flows or swirl
- Reversed flows
- Wind engineering
- Automotive wind tunnels
- Measures Total & Static pressure
- 1 hole
- Flow angles within ± 20°
- Tip as small as 3.2 mm
- Temperature rating up to -40° C to 85° C
- Measure air speed
- Wind tunnel facilities
- Unmanned Aerial Vehicles
- Aviation
- Compact
- Accurate
- Mulit-point measurements
- Turbomachinery
- Automotive engine compartments
- 5-hole, Kiel, Pitot, or TAT Heads possible
- Dimensions may be customer specified to fit
- Flow angles up to 60°
- Tip as small as 1.6mm
- Temperature rating up to 900° C
- High accuracy calibrations
- Wind tunnel testing
- Motorsports
- Automotive
- University/Research